CARA INSTAL MODEM SMART FREN CE 682 UI

[+] Post Title :

CARA INSTAL MODEM SMART FREN CE 682 UI

[+] Date : Sabtu, 24 Maret 2012
[+] Author : Alma'ruff audi
[+] Link : https://almaevolution.blogspot.com/2012/03/cara-instal-modem-smart-fren-ce-682-ui.html
[+] Type : ubuntu

berikut ini cara instal modem smart fren CE682 UI:

buka terminal:

indra@indra-Aspire-4732Z:~$ dmesg | tail
[ 16.435959] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.963390] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.966436] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 241.704054] usb 2-2: USB disconnect, address 3
[ 253.352033] usb 2-2: new full speed USB device using uhci_hcd and address 4
[ 253.522675] scsi5 : usb-storage 2-2:1.0
[ 254.524252] scsi 5:0:0:0: CD-ROM CDROM EVDO ReV A 7.00 PQ: 0 ANSI: 2
[ 254.536216] sr1: scsi-1 drive
[ 254.536454] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 254.536652] sr 5:0:0:0: Attached scsi generic sg2 type 5

karena itu eject dulu cdromnya dengan perintah :

indra@indra-Aspire-4732Z:~$ sudo eject /dev/sr1

Lihat lagi dengan dmesgnya

indra@indra-Aspire-4732Z:~$ dmesg | tail
[ 254.524252] scsi 5:0:0:0: CD-ROM CDROM EVDO ReV A 7.00 PQ: 0 ANSI: 2
[ 254.536216] sr1: scsi-1 drive
[ 254.536454] sr 5:0:0:0: Attached scsi CD-ROM sr1
[ 254.536652] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 365.648085] usb 2-2: USB disconnect, address 4
[ 368.192038] usb 2-2: new full speed USB device using uhci_hcd and address 5
[ 368.375134] scsi6 : usb-storage 2-2:1.3
[ 369.380301] scsi 6:0:0:0: Direct-Access SDVDISK EVDO ReV A 7.00 PQ: 0 ANSI: 0 CCS
[ 369.381257] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 369.473277] sd 6:0:0:0: [sdb] Attached SCSI removable disk

sudah terdeteksi,
sekarang cek modem dengan perintah

indra@indra-Aspire-4732Z:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 201e:1022
Bus 002 Device 002: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

ternyata terdetect dengan vendor dan product idnya,Bus 002 Device 005: ID 201e:1022
tapi nama vendornya ga muncul, ga masalah tetep lanjut
sekarang ke pengaturan, masuk ke :

indra@indra-Aspire-4732Z:~$ sudo gedit /etc/usb_modeswitch.conf

tambahkan kode dibawah ke baris yang paling akhir :

########################################################
# /etc/usb_modeswitch.conf
#
# Smart Haier CE682 (EVDO)
#

DefaultVendor = 0x201e
DefaultProduct = 0×1022

TargetVendor = 00x201e
TargetProduct = 0×1022

MessageContent=”5553424312345678c00000008000069f030000000000000000000000000000″

masuk lagi ke :

andy@politoz:~$ sudo gedit /etc/udev/rules.d/99-haier-ce682.rules

isi dengan

########################################################
# /etc/udev/rules.d/99-zte-ce682.rules
#
# Smart Haier CE682 (EVDO)
#
SUBSYSTEM==”usb”, SYSFS{idVendor}==”201e”,
SYSFS{idProduct}==”1022″, RUN+=”/usr/sbin/usb_modeswitch –default-vendor 0x201e –default-product 0×1022 –message-content 5553424312345678c00000008000069f030000000000000000000000000000″

lalu save
sekarang load beberapa parameter yang dibutuhkan ke kernel

indra@indra-Aspire-4732Z:~$ sudo modprobe usbserial vendor=0X201e product=0X1022

lalu deteksi modemnya via wvdial, bagi yang blum diinstal instal dulu dengan perintah
sudo apt-get install wvdial

indra@indra-Aspire-4732Z:~$ sudo wvdialconf
Editing `/etc/wvdial.conf’.

Scanning your serial ports for a modem.

ttyS0: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyS0: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyS0: ATQ0 V1 E1 — and failed too at 115200, giving up.
ttyS1: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyS1: ATQ0 V1 E1 — failed with 9600 baud, next try: 115200 baud
ttyS1: ATQ0 V1 E1 — and failed too at 115200, giving up.
Modem Port Scan: S2 S3 S4 S5 S6 S7 S8 S9
Modem Port Scan: S10 S11 S12 S13 S14 S15 S16 S17
Modem Port Scan: S18 S19 S20 S21 S22 S23 S24 S25
Modem Port Scan: S26 S27 S28 S29 S30 S31
WvModem: Cannot get information for serial port.
ttyUSB0: ATQ0 V1 E1 — OK
ttyUSB0: ATQ0 V1 E1 Z — OK
ttyUSB0: ATQ0 V1 E1 S0=0 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB0: Modem Identifier: ATI — Manufacturer: +GMI: China TeleCom
ttyUSB0: Speed 9600: AT — OK
ttyUSB0: Max speed is 9600; that should be safe.
ttyUSB0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem: Cannot get information for serial port.
ttyUSB1: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB1: ATQ0 V1 E1 — and failed too at 115200, giving up.
WvModem: Cannot get information for serial port.
ttyUSB2: ATQ0 V1 E1 — OK
ttyUSB2: ATQ0 V1 E1 Z — OK
ttyUSB2: ATQ0 V1 E1 S0=0 — OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 — OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyUSB2: Modem Identifier: ATI — Manufacturer: +GMI: China TeleCom
ttyUSB2: Speed 9600: AT — OK
ttyUSB2: Max speed is 9600; that should be safe.
ttyUSB2: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK

Found a modem on /dev/ttyUSB0.
Modem configuration written to /etc/wvdial.conf.
ttyUSB0: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″
ttyUSB2: Speed 9600; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″

modem terdeteksi di /dev/ttyUSB0
lanjut ke pengaturan wvdial
masuk ke

indra@indra-Aspire-4732Z:~$ sudo gedit /etc/wvdial.conf

tambahkan baris berikut

[Dialer smart]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

Stupid Mode = 1
Modem Type = Analog Modem
Command Line = ATDT
ISDN = 0
New PPPD = yes
Phone = #777
Modem = /dev/ttyUSB0
Username = smart
Password = smart
Baud = 460800

langkah terakhir coba koneksi dengan cara

indra@indra-Aspire-4732Z:~$ sudo wvdial smart
–> WvDial: Internet dialer version 1.61
–> Cannot get information for serial port.
–> Initializing modem.
–> Sending: ATZ
ATZ
OK
–> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
–> Modem initialized.
–> Sending: ATDT#777
–> Waiting for carrier.
ATDT#777
CONNECT 3100000
–> Carrier detected. Starting PPP immediately.
–> Starting pppd at Sat Nov 26 09:50:26 2011
–> Pid of pppd: 3161
–> Using interface ppp0
–> local IP address 10.254.169.102
–> remote IP address 10.20.31.22
–> primary DNS address 10.17.3.252
–> secondary DNS address 10.17.3.245

kalau sudah mendapat ip addrees diatas harusnya sudah bisa browsing internet.
sekarang masalahnya setiap mau konek, modem kita colokkan, kita harus eject cd rom, load kernel dll, nah biar cepat kita buat launcher bash script, buat file baru ekstensi .sh, isi seperti berikut :

#!/bin/bash

sudo eject /dev/sr1
sleep 2
sudo modprobe usbserial vendor=0X201e product=0X1022
sleep 2
sudo wvdial smart

rubah permissionnnya dulu agar bisa dijalankan

indra@indra-Aspire-4732Z:~$ sudo chmod +x smart.sh

untuk menjalankan tinggal ketik

indra@indra-Aspire-4732Z:~$ ./smart.sh

 

 

Sumber